Inventory 4 for EverQuest II · User guide

Set it up.
Put it to work.

Configure Inventory 4, run your everyday tasks, and check the results. Follow the numbered steps and pictures from your first profile to a repeatable Auto Rules routine.

In this guide · 13 chapters
01

Launch Inventory and save a profile

Start with a connected character, then save a named set of settings you can return to.

  1. Log in to EverQuest II through your usual InnerSpace setup. Wait until the character is in the world and the BJ Scripts setup is available.
  2. Open the InnerSpace console and run BJ IM2. BJ Inventory2 opens the same application. Check the character shown in the title and the client status.
  3. Connect if needed. Use File → Client → Connect if the client is disconnected. Tasks that read or change game inventory need that connection.
  4. Create a profile. Use File → Create New for a fresh setup, then File → Save As. Give the JSON profile a recognizable name, such as Alderwyn - Daily.json.
  5. Learn the main controls. Choose a task from the menu, configure that page, then use the large START button. The selected page determines the task that starts.
FIGURE 01Your first profile and connected client
  1. Save your first profile
  2. Connect the client if needed
  3. START runs the selected task
  4. Confirm the client is connected

Save and reload

Use File → Save after changing profile options. Use Save As to create another named setup and Load to open one you saved. Save the current profile before switching to another.

Stop a running task

The main button changes while a task is active. Use STOP to request cancellation, then wait for the task status to settle before starting again. Review any interrupted operation in Review Skipped Items.

Profiles, lists, and presets have different jobs.

A profile holds page settings. Specific-item lists hold item names. An Auto Rules list holds a sequence of tasks, and task presets capture supported run options. Saving one does not replace saving the others.

Check the result

The client shows connected, the intended character is selected, and your named profile is saved. Leave repeating tasks off while you verify your first run.

Back to contents ↑
02

Configure the essentials

Set the game directory and runtime options before adding reporting or connections to another computer.

OPEN File → Settings

  1. Choose the EverQuest II directory. On General, use Browse… beside EQ2 Directory and select the game installation folder. This also lets Inventory locate the store logs used by My Store.
  2. Keep Developer mode unchecked for normal use. A runtime-mode change restarts the client. Keep Detailed logging off unless you are collecting information to investigate a problem.
  3. Review the finance options if you want reporting. Enable the capture and upload options you need for the current character, then choose whether to include manual broker purchases, merchant purchases, merchant sales, and coin loot.
  4. Set up website access when ready. Complete the shared BJ Scripts account setup, then use Web Dashboard → Test Connection. After a successful test, choose Upload Data or enable Automatically sync website data.
FIGURE 02General settings and website connection
  1. Choose the EverQuest II folder
  2. Leave Developer mode off for normal use
  3. Test website access before enabling sync
Website authentication comes from shared BJ Scripts settings.

Inventory reads the shared token; this page does not have a token entry box. If the test reports that the shared token is missing, complete the BJ Scripts sign-in or account setup, then test again.

When you need the Connections tab

Use Settings → Connections for direct Inventory connections and pairing another computer. For a single local character, start by confirming the normal client connection. See Trading before setting up delivery between computers.

Check the result

The directory is correct, Developer mode is off, and the client reconnects if a restart was needed. For reporting, check the connection result and Last synced after an upload.

Back to contents ↑
03

Place items on the broker

Choose the bags to use and the destination for each item before running placement.

OPEN Broker → Placement

  1. Select the inventory bags to scan. Start with one or two bags that contain items you intend to list. Use Refresh to populate the table. Refresh on Start requests a fresh scan when the task begins.
  2. Review the item rows. Set Placement Target to Auto or a particular broker box, such as Box 1. Confirm the selected box is available for that character.
  3. Set the stock limit. A positive Max on broker value sets the intended limit for that item. A blank item value uses the page default. For example, use a limit of 200 for the Ferrite Cluster row.
  4. Exclude items you want to keep out of placement. Review the Do Not Place list. Placement exclusions do not sell or destroy an item.
  5. Save the profile and press START. Have broker access available. Allow the task to finish, then refresh and review the result.
FIGURE 03Bag scope, destinations, and stock limits
  1. Choose which bags to scan
  2. Refresh the item list
  3. Set Placement Target and Max on broker
  4. Start after reviewing the rows

Keep the first run small

Use a limited bag selection and clear item destinations. Add optional consolidation after basic placement works as expected; review which broker boxes it will use.

Resolve held removals

If a quantity-removal hold is reported, use Review removal and compare the current bags and broker contents with the recorded result before trying the operation again.

Check the result

Refresh the broker contents and compare listed quantities with the intended boxes and limits. Read any skipped reason before changing the configuration.

Back to contents ↑
04

Configure and run broker pricing

Select the listings to evaluate, apply your price rules, and inspect the result before enabling a loop.

OPEN Broker → Pricing

  1. Select the broker boxes to price, then Refresh. Confirm that the displayed listings are the ones you intend to update.
  2. Open Price Rules… Review the applicable minimum, maximum, default, or static prices. Use rules to express the limits you want for particular items.
  3. Choose any adjustment before listing. If you enable Adjust price before listing, choose Flat amount or Percentage and enter the value. Review Rules… and any seller-matching options you use.
  4. Leave Loop unchecked for the first run. Save the profile and press START with broker access available.
  5. Read the resulting price and Reason for each row. After a successful pass, you can enable Loop and configure its minimum and maximum delay.
FIGURE 04Pricing options and the result table
  1. Select broker boxes
  2. Refresh current listings
  3. Review price adjustment options
  4. Set price floors and other rules
  5. Check prices and reasons after a run
Price rules and scan scope work together.

A price rule controls how a matching listing is handled. The selected broker boxes control which listings the run considers. Check both when a listing receives an unexpected result.

Check the result

Read the price and reason columns, then verify the updated listing. If an item was skipped, follow its reason instead of assuming the price was changed.

Back to contents ↑
05

Build a specific-item cleanup list

Use exact item names when you want a repeatable sell, transmute, destroy, or reclaim task.

OPEN Sell → Specific

  1. Choose the bags for this task and click Refresh. The inventory table shows eligible items in the selected scope.
  2. Select the items you intend to sell and click Add. Their exact names appear in the Saved List. Use Remove to take a name out of that list.
  3. Read the entire Saved List before running. Match the names to the items you intend to process. Select Refresh on Start if you want a fresh inventory scan at the beginning.
  4. Make the merchant available and press START. Wait for completion, then inspect the activity and current inventory.
FIGURE 05Build and check a Sell Specific list
  1. Limit the bags used by this task
  2. Refresh eligible inventory
  3. Add selected items to the saved list
  4. Review the exact saved names

Use the same approach for other cleanup tasks

TaskConfigureBefore you run
Transmuting → Specific ItemsAdd the exact item names and select the bags.Recover attached adornments first when needed.
Destroy → SpecificReview every saved name and the bag scope.Confirm you intend to remove matching items permanently.
Adornments → Reclaim SpecificSave the exact names of items whose adornments you want to reclaim.Run reclaim before a later sell, transmute, or destroy step.
Specific-item lists are shared by server on this PC.

Characters on the same server using the same Windows account share these saved item-name lists. Editing one can affect those characters. Task presets do not contain separate copies of the names.

The General pages use broader filters. Start with a Specific list when exact names give you the control you need. A Queue Sell, Queue Transmute, or Queue Destroy action in a review table only adds names to the corresponding list; run that task separately.

Check the result

Refresh inventory and compare the processed names with the activity result. An item remaining in a bag may have been excluded or skipped; read its recorded reason.

Back to contents ↑
06

Deposit items and restock from depots

Save depot rules explicitly, then run them against the nearby depots you intend to use.

OPEN Depot → Deposit

  1. Choose the depot in the rule editor. Select Deposit All or a Level range. For a level range, enter the minimum and maximum levels.
  2. Select the bags and item types. Limit both to the material you want this rule to deposit. Check Enabled for a rule that should run.
  3. Apply the editor to the saved rule list. Click Add Depot for a new rule. To change a saved rule, select its row, edit the controls, then click Edit Depot.
  4. Review the saved rows and save the profile. Only after applying the rule should you save a task preset for Auto Rules.
  5. Stand within reach of the required depot and press START. Review the completed rule results. Use Review interrupted run if the task reports an unresolved interruption.
FIGURE 06Apply depot rules before saving
  1. Choose the depot and deposit mode
  2. Choose the bags
  3. Choose item types
  4. Apply a new or edited rule
  5. Review and enable the saved rules
Apply first, save second.

Changing the editor controls does not update a saved depot row until you click Add Depot or Edit Depot. With all bags and all accepted categories selected, a rule can use the game's Deposit All action; restricted rules use the configured filters.

Move depot stock to your broker

Depot restocking withdraws eligible stock from a depot for broker restocking. Configure this separately from deposit rules:

  1. In My Store item rules, choose Find depot stock, then Find nearby depots.
  2. Select the source depots and choose Scan selected depots.
  3. Set Keep in depot and Restock target for each item, then enable its Restock option.
  4. Choose Save stock rules, then Restock now. You can also use Restock depots now from My Store's Restock page.
Check the result

For deposits, compare the current bag and depot contents. For restocking, check depot reserves and broker quantities. After an interrupted stock operation, inspect the items, rescan the sources, and save the reviewed stock rules before retrying.

Back to contents ↑
07

Buy supplies within your limits

Configure a purchase cart with quantities, price limits, a total spending allowance, and money to keep on hand.

OPEN Broker → Buy

  1. Set Total Budget. Review Spent and Remaining. Enable Keep On Hand and enter the money the character should retain.
  2. Choose New Item and enter the exact Item Name. Set Wanted Quantity, then set Max Per Unit and Max Total for that cart item.
  3. Enable the item and click Add to Cart. Repeat for other supplies. Review every enabled cart row, including quantities already bought and the remaining need.
  4. Click Save and leave Loop off. With broker access available, press START for a single pass.
  5. Review Bought, Need, Status, and Notes. Check the budget counters before deciding whether to run again.
FIGURE 07Purchase limits and the saved cart
  1. Set Total Budget and Keep On Hand
  2. Set item quantity and price limits
  3. Add the item to the cart
  4. Review the current cart before START

Example limits

For four units at no more than 50 gold each, enter a wanted quantity of 4, a per-unit cap of 50 gold, and an item total of 2 platinum. The overall budget and Keep On Hand setting still apply.

Know what “No limit” means

A blank or zero optional item price limit removes that per-item cap. It does not remove the total budget or cash reserve. Use explicit item limits when you want a price ceiling.

Reset Budget starts a new spending allowance by resetting the budget's recorded spend. Use it deliberately after checking what has already been purchased.

Check the result

Compare the cart quantities and spending totals with the inventory received. If the task could not buy, read Status and Notes for availability, price, budget, or reserve constraints.

Back to contents ↑
08

Build and run an Auto Rules list

Turn verified individual tasks into an ordered routine, then enable repetition when one pass behaves as intended.

OPEN Auto Rules

  1. Configure and test each task on its own page first. Use the bag scope, limits, and filters you want the routine to use.
  2. Create a named list with New. Give it a clear name such as Daily inventory. These lists belong to the current character and server.
  3. Capture a preset for a supported task. Select the task, enter a name under Save as, and choose Save Preset. This captures that task's current run options.
  4. Add a step and choose its Task and Preset. Set Enabled, then use Move Up or Move Down to put the steps in order. Reclaim should precede cleanup when adornments need recovering; placement normally precedes pricing.
  5. Set Every (h) and save the list. 0 runs the step each eligible loop. A larger number defers that step until the interval has passed since its last completed run.
  6. Uncheck Loop for the first pass and press START. Read each step's status and last-run information. Once verified, enable Loop and set Delay Min and Delay Max in minutes.
FIGURE 08Order tasks and choose their presets
  1. Create or select a named list
  2. Run once first; enable Loop later
  3. Save task settings as a preset
  4. Choose tasks, presets, and Every (h)
  5. Set the execution order
Two tasks use current settings instead of a saved task preset.

Broker Buying uses the character's current cart, budget, and cash reserve. Depot Restock uses the current My Store stock rules. Review those settings before starting an Auto Rules list that includes either task.

What to save before you run

ConfigurationSave action
Normal page optionsFile → Save for the profile; capture the intended Auto Rules task preset separately.
Depot deposit rulesAdd Depot or Edit Depot first, then save the profile or preset.
Task sequence and scheduleSave on the Auto Rules list.
Specific-item namesUpdate the relevant shared saved list; names are not copied into task presets.
Buying and depot stockSave the buying cart or stock rules on its own page.

Available tasks include reclaim, specific-item cleanup, depot harvesters, depot restock, depot deposit, broker consolidation, placement, pricing, buying, and trading. Broker consolidation shares placement presets.

Check the result

Read the status of each step, including deferred and skipped work. A completed list does not mean every item changed. Investigate holds and item-level review entries before starting another pass.

Back to contents ↑
09

Review and apply adornments

Scan equipped gear, decide what should change, and confirm the outcome for each approved slot.

OPEN Adornments → Gear Health

  1. Click Refresh Health. Review the gear item, slot type, current adornment, and Health result for each row.
  2. Check the Recommendation, Source, and Notes. Adjust a recommendation where needed. Resolve rows needing manual review before approving them.
  3. Select rows and choose a review decision. Use Approve for a change you want, Ignore to skip the recommendation, or Lock to retain the decision. Reset clears the review choice.
  4. Prepare missing sources. Create Craft Queue builds a queue from approved rows. Review that queue and its material requirements before running the required crafting work.
  5. With Gear Health selected, press START to apply ready approved rows. An approval alone does not apply an adornment. Review Apply Status and any blocked-row notes after the run.
FIGURE 09Review equipment one slot at a time
  1. Refresh the equipment scan
  2. Read Health and Review for each slot
  3. Approve, ignore, or lock the decision

Reclaim before a later cleanup step

Use Adornments → Reclaim Specific to maintain the exact item names whose adornments should be recovered. Run reclaim before selling, transmuting, or destroying those items. In Auto Rules, place the reclaim task before the cleanup task.

If you select Deposit to Depot when finished, make sure the intended depot is available before the follow-up deposit work.

Check the result

Refresh Health after applying and inspect the current adornment and Apply Status for the affected slots. A row can be approved yet remain blocked by a missing source or another unmet requirement.

Back to contents ↑
10

Choose and trade selected items

Confirm the recipient and selected inventory before starting a transfer.

OPEN Trading

  1. Choose the trading partner. If you use Current Target, target the intended character in game before starting.
  2. Choose the acceptance behavior. Enable Auto Accept only when you want that behavior for this workflow; otherwise plan to review and accept the trade yourself.
  3. Select the bags, then Refresh. Use the item-type and level filters to narrow the inventory shown.
  4. Select the actual rows to transfer. Review item names and quantities after using Select All or Select None.
  5. Verify the partner again, then press START. Keep the recipient available and complete any required acceptance. Wait for the final task result.
FIGURE 10Confirm the partner and selected rows
  1. Confirm the recipient
  2. Choose the acceptance behavior
  3. Select bags and refresh inventory
  4. Review selected rows before START

Set up a connection to another computer

Open File → Settings → Connections. Use Setup Help to configure direct Inventory connectivity for your computers. Review the listen address and port, then choose Save after changing them. Use Reload to restore the saved connection options. Use Pair a Computer and follow the pairing flow on the participating machines.

Test the connection and review any required character or guild approvals before depending on cross-computer delivery. Pairing a computer and approving a character are separate decisions. Use Remove Pairing when a connection is no longer needed.

Check the result

Confirm receipt with the intended recipient and refresh the source inventory. Read the final trade status before repeating a transfer that stopped or lost its connection.

Back to contents ↑
11

Track sales and sync your reports

Use store history to review sales, then configure the sources and stock rules needed for restocking.

OPEN Broker → My Store

  1. Set the EQ2 Directory in Settings first. Check the store-log monitoring status so Inventory can locate the sales history it uses.
  2. Open Sales. Choose a time Range, enter an item filter if needed, and use Clear to remove the filter.
  3. Read the sale details. Compare quantity, sold-for amount, listed time, time on broker, and source. Treat Est. Cost and Est. Profit as estimates based on the available cost data.
  4. Update the sources used for restocking. On Data Sources, refresh recipe and merchant-price information as needed. Review the material prices and item rules before using craft or restock actions.
  5. Configure the intended stock and delivery workflow. Set the item rules, then check the required crafters and delivery connections before starting the available restock work. For depot sources, follow the depot stock steps.
FIGURE 11Filter and read your sales history
  1. Open Sales
  2. Filter the time range and item
  3. Read the sale, source, and estimated profit

View reports on the website

Use File → Settings → Web Dashboard → Test Connection, then Upload Data for a manual upload or enable automatic sync. Open the Inventory dashboard using your BJ Scripts account.

Compare Last synced with the report you are viewing. Website reports reflect uploaded data; task execution and its controls remain in the Inventory application.

Check the result

Check the selected sales range and source data when values appear incomplete. After an upload, confirm Last synced and refresh the website report.

Back to contents ↑
12

Review skipped items and interrupted work

Use the recorded reason and the current inventory together to decide the next action.

OPEN Review Skipped Items

  1. Refresh the evidence. Use Refresh Log for recorded activity and Refresh Inventory for current observations. Remember that an inventory scan reflects its selected bag scope.
  2. Check On hold first. Read the item, quantity, reason, and last update. Compare them with the actual bags, broker, depot, or trade involved.
  3. Choose the next item decision. Queue Sell, Queue Transmute, and Queue Destroy add the selected names to the corresponding saved lists. Open Reclaim takes you to reclaim configuration.
  4. Run the appropriate task separately. Review that task's bag scope and saved names before pressing START.
  5. Mark reviewed once the decision is handled. Mark Reviewed clears the attention record; it does not change the item in game. Resolve a hold only after verifying the interrupted operation's actual result.
FIGURE 12Read the reason before taking another action
  1. Refresh the history or current inventory
  2. Check for unresolved holds
  3. Queue a decision or open reclaim
  4. Read the reason and last update
ResultWhat to do next
CompletedCheck the counts and outcome. A valid scan can finish with no matching work.
Skipped / Needs attentionRead the item reason and decide whether to change a rule, supply a requirement, or leave it alone.
On hold / InterruptedInspect the actual inventory state, then use the relevant review controls before retrying.
Cancelled / StoppedCheck what completed before cancellation. Wait for the task to settle and review any unresolved entries.
Check the result

Use activity history to confirm what happened. Clear attention records only after understanding them, and avoid repeating an uncertain transfer until its current state is known.

Back to contents ↑
13

Find the next thing to check

Start with the current page, connection, scope, and recorded result.

START does not run the task I expected

Check the selected page: the main button runs that page's task. Open the intended task, verify its settings, and confirm the client is connected. If another task is still stopping, wait for its final status.

Refresh shows no items

Check the selected bags or broker boxes, then check the filters and exclusions. Confirm the current character and client connection. Refresh again after making the required merchant, broker, or depot available.

My depot settings did not appear in a preset

Select the saved depot rule and click Edit Depot after changing it, or Add Depot for a new rule. Save the profile, then capture the Auto Rules preset again. The editor must be applied before a preset can include the intended saved rule.

An Auto Rules task is waiting instead of running

Check Enabled, Every (h), and the last completed run. The step may not be due yet. Also inspect the selected preset and any unresolved hold. Broker Buying and Depot Restock use their current page settings instead of a task preset.

A queued item was not sold, transmuted, or destroyed

Queueing adds the exact name to a saved list. Open that task, check the list and bag scope, then run it. Recover adornments first where needed, and read any item-level reason if the task skips it.

Broker Buying leaves items unpurchased

Check that the cart row is enabled, the wanted quantity is still needed, and matching stock is available. Review the per-unit cap, item total, remaining budget, Keep On Hand amount, and the row's status before changing a limit.

Sales or estimated profit are missing

Verify the EverQuest II directory and store-log status. Clear Sales filters and choose the intended time range. Review the available source and cost information: estimates depend on the data Inventory has collected.

Website sync cannot authenticate

Inventory uses the shared BJ Scripts token. Complete the shared account setup, then return to Settings and choose Test Connection. After a successful test, choose Upload Data and check Last synced.

A run stopped during an item move

Check current bags and the destination before rerunning. Open the relevant hold or interrupted-run review, compare the recorded quantities, and resolve the review after verifying the result. For depot stock, rescan and save the reviewed stock rules.

A useful first routine

Configure one bag, run one task, and check its result. Save that working setup. Then add it to Auto Rules, test one complete pass with Loop off, and add more tasks as you verify them.

Back to contents ↑
Shopping Cart
  • Your cart is empty.